Как обновить модификацию OpenCart по коду

Вы не можете контролировать таким образом, как вы делаете:

Вы должны сделать это как

public function install() {
$this->refresh();
}

protected function refresh($data = array()) {
$this->load->language('marketplace/modification');

$this->document->setTitle($this->language->get('heading_title'));

$this->load->model('setting/modification');

if ($this->validate()) {
// Just before files are deleted, if config settings say maintenance mode is off then turn it on
$maintenance = $this->config->get('config_maintenance');

$this->load->model('setting/setting');

$this->model_setting_setting->editSettingValue('config', 'config_maintenance', true);

//Log
$log = array();

// Clear all modification files
$files = array();

// Make path into an array
$path = array(DIR_MODIFICATION . '*');

// While the path array is still populated keep looping through
while (count($path) != 0) {
$next = array_shift($path);

foreach (glob($next) as $file) {
// If directory add to path array
if (is_dir($file)) {
$path[] = $file . '/*';
}

// Add the file to the files to be deleted array
$files[] = $file;
}
}

// Reverse sort the file array
rsort($files);

// Clear all modification files
foreach ($files as $file) {
if ($file != DIR_MODIFICATION . 'index.html') {
// If file just delete
if (is_file($file)) {
unlink($file);

// If directory use the remove directory function
} elseif (is_dir($file)) {
rmdir($file);
}
}
}

// Begin
$xml = array();

// Load the default modification XML
$xml[] = file_get_contents(DIR_SYSTEM . 'modification.xml');

// This is purly for developers so they can run mods directly and have them run without upload after each change.
$files = glob(DIR_SYSTEM . '*.ocmod.xml');

if ($files) {
foreach ($files as $file) {
$xml[] = file_get_contents($file);
}
}

// Get the default modification file
$results = $this->model_setting_modification->getModifications();

foreach ($results as $result) {
if ($result['status']) {
$xml[] = $result['xml'];
}
}

$modification = array();

foreach ($xml as $xml) {
if (empty($xml)){
continue;
}

$dom = new DOMDocument('1.0', 'UTF-8');
$dom->preserveWhiteSpace = false;
$dom->loadXml($xml);

// Log
$log[] = 'MOD: ' . $dom->getElementsByTagName('name')->item(0)->textContent;

// Wipe the past modification store in the backup array
$recovery = array();

// Set the a recovery of the modification code in case we need to use it if an abort attribute is used.
if (isset($modification)) {
$recovery = $modification;
}

$files = $dom->getElementsByTagName('modification')->item(0)->getElementsByTagName('file');

foreach ($files as $file) {
$operations = $file->getElementsByTagName('operation');

$files = explode('|', $file->getAttribute('path'));

foreach ($files as $file) {
$path = '';

// Get the full path of the files that are going to be used for modification
if ((substr($file, 0, 7) == 'catalog')) {
$path = DIR_CATALOG . substr($file, 8);
}

if ((substr($file, 0, 5) == 'admin')) {
$path = DIR_APPLICATION . substr($file, 6);
}

if ((substr($file, 0, 6) == 'system')) {
$path = DIR_SYSTEM . substr($file, 7);
}

if ($path) {
$files = glob($path, GLOB_BRACE);

if ($files) {
foreach ($files as $file) {
// Get the key to be used for the modification cache filename.
if (substr($file, 0, strlen(DIR_CATALOG)) == DIR_CATALOG) {
$key = 'catalog/' . substr($file, strlen(DIR_CATALOG));
}

if (substr($file, 0, strlen(DIR_APPLICATION)) == DIR_APPLICATION) {
$key = 'admin/' . substr($file, strlen(DIR_APPLICATION));
}

if (substr($file, 0, strlen(DIR_SYSTEM)) == DIR_SYSTEM) {
$key = 'system/' . substr($file, strlen(DIR_SYSTEM));
}

// If file contents is not already in the modification array we need to load it.
if (!isset($modification[$key])) {
$content = file_get_contents($file);

$modification[$key] = preg_replace('~\r?\n~', "\n", $content);
$original[$key] = preg_replace('~\r?\n~', "\n", $content);

// Log
$log[] = PHP_EOL . 'FILE: ' . $key;
}

foreach ($operations as $operation) {
$error = $operation->getAttribute('error');

// Ignoreif
$ignoreif = $operation->getElementsByTagName('ignoreif')->item(0);

if ($ignoreif) {
if ($ignoreif->getAttribute('regex') != 'true') {
if (strpos($modification[$key], $ignoreif->textContent) !== false) {
continue;
}
} else {
if (preg_match($ignoreif->textContent, $modification[$key])) {
continue;
}
}
}

$status = false;

// Search and replace
if ($operation->getElementsByTagName('search')->item(0)->getAttribute('regex') != 'true') {
// Search
$search = $operation->getElementsByTagName('search')->item(0)->textContent;
$trim = $operation->getElementsByTagName('search')->item(0)->getAttribute('trim');
$index = $operation->getElementsByTagName('search')->item(0)->getAttribute('index');

// Trim line if no trim attribute is set or is set to true.
if (!$trim || $trim == 'true') {
$search = trim($search);
}

// Add
$add = $operation->getElementsByTagName('add')->item(0)->textContent;
$trim = $operation->getElementsByTagName('add')->item(0)->getAttribute('trim');
$position = $operation->getElementsByTagName('add')->item(0)->getAttribute('position');
$offset = $operation->getElementsByTagName('add')->item(0)->getAttribute('offset');

if ($offset == '') {
$offset = 0;
}

// Trim line if is set to true.
if ($trim == 'true') {
$add = trim($add);
}

// Log
$log[] = 'CODE: ' . $search;

// Check if using indexes
if ($index !== '') {
$indexes = explode(',', $index);
} else {
$indexes = array();
}

// Get all the matches
$i = 0;

$lines = explode("\n", $modification[$key]);

for ($line_id = 0; $line_id < count($lines); $line_id++) {
$line = $lines[$line_id];

// Status
$match = false;

// Check to see if the line matches the search code.
if (stripos($line, $search) !== false) {
// If indexes are not used then just set the found status to true.
if (!$indexes) {
$match = true;
} elseif (in_array($i, $indexes)) {
$match = true;
}

$i++;
}

// Now for replacing or adding to the matched elements
if ($match) {
switch ($position) {
default:
case 'replace':
$new_lines = explode("\n", $add);

if ($offset < 0) {
array_splice($lines, $line_id + $offset, abs($offset) + 1, array(str_replace($search, $add, $line)));

$line_id -= $offset;
} else {
array_splice($lines, $line_id, $offset + 1, array(str_replace($search, $add, $line)));
}
break;
case 'before':
$new_lines = explode("\n", $add);

array_splice($lines, $line_id - $offset, 0, $new_lines);

$line_id += count($new_lines);
break;
case 'after':
$new_lines = explode("\n", $add);

array_splice($lines, ($line_id + 1) + $offset, 0, $new_lines);

$line_id += count($new_lines);
break;
}

// Log
$log[] = 'LINE: ' . $line_id;

$status = true;
}
}

$modification[$key] = implode("\n", $lines);
} else {
$search = trim($operation->getElementsByTagName('search')->item(0)->textContent);
$limit = $operation->getElementsByTagName('search')->item(0)->getAttribute('limit');
$replace = trim($operation->getElementsByTagName('add')->item(0)->textContent);

// Limit
if (!$limit) {
$limit = -1;
}

// Log
$match = array();

preg_match_all($search, $modification[$key], $match, PREG_OFFSET_CAPTURE);

// Remove part of the the result if a limit is set.
if ($limit > 0) {
$match[0] = array_slice($match[0], 0, $limit);
}

if ($match[0]) {
$log[] = 'REGEX: ' . $search;

for ($i = 0; $i < count($match[0]); $i++) {
$log[] = 'LINE: ' . (substr_count(substr($modification[$key], 0, $match[0][$i][1]), "\n") + 1);
}

$status = true;
}

// Make the modification
$modification[$key] = preg_replace($search, $replace, $modification[$key], $limit);
}

if (!$status) {
// Abort applying this modification completely.
if ($error == 'abort') {
$modification = $recovery;
// Log
$log[] = 'NOT FOUND - ABORTING!';
break 5;
}
// Skip current operation or break
elseif ($error == 'skip') {
// Log
$log[] = 'NOT FOUND - OPERATION SKIPPED!';
continue;
}
// Break current operations
else {
// Log
$log[] = 'NOT FOUND - OPERATIONS ABORTED!';
break;
}
}
}
}
}
}
}
}

// Log
$log[] = '----------------------------------------------------------------';
}

// Log
$ocmod = new Log('ocmod.log');
$ocmod->write(implode("\n", $log));

// Write all modification files
foreach ($modification as $key => $value) {
// Only create a file if there are changes
if ($original[$key] != $value) {
$path = '';

$directories = explode('/', dirname($key));

foreach ($directories as $directory) {
$path = $path . '/' . $directory;

if (!is_dir(DIR_MODIFICATION . $path)) {
@mkdir(DIR_MODIFICATION . $path, 0777);
}
}

$handle = fopen(DIR_MODIFICATION . $key, 'w');

fwrite($handle, $value);

fclose($handle);
}
}

// Maintance mode back to original settings
$this->model_setting_setting->editSettingValue('config', 'config_maintenance', $maintenance);

// Do not return success message if refresh() was called with $data
$this->session->data['success'] = $this->language->get('text_success');

$url = '';

if (isset($this->request->get['sort'])) {
$url .= '&sort=' . $this->request->get['sort'];
}

if (isset($this->request->get['order'])) {
$url .= '&order=' . $this->request->get['order'];
}

if (isset($this->request->get['page'])) {
$url .= '&page=' . $this->request->get['page'];
}

}}

Я надеюсь, что это будет работать для вас.
Этот процесс используется для обновления модификации при установке вашего модуля.

если вам нужно глобально, то, пожалуйста, скажите мне, что я обновлю ваш процесс.