Получение данных о подземном грунте от MKR1000

Я пытаюсь получить данные о погоде от wunderground.com с помощью моего Arduino MKR1000 и отображать его (пока на последовательном мониторе, но в будущем на отдельном дисплее), но я немного застрял: как мне получить конкретный Объект / ы со страницы, которые содержат / с данные о погоде?
У меня уже есть ключ API, и я использую некоторый код из Arduino.cc (Запланированный WiFi SSL веб-клиент).

/*
created 19 Jan 2016
by Arturo Guadalupi <[email protected]>
This code is in the public domain.

Weather Station: xxxxxxxx
Link: https://www.wunderground.com/weather/gb/xxxxxxx/xxxxxxx

*/

#include <SPI.h>
#include <WiFi101.h>
#include <RTCZero.h>

char ssid[] = "xxxxxx";      //  your network SSID (name)
char pass[] = "xxxxxx";       // your network password
int keyIndex = 0;                  // your network key Index number (needed    only for WEP)

int status = WL_IDLE_STATUS;

// Initialize the Wifi client library
WiFiSSLClient client;

// server address:
char server[] = "https://www.wunderground.com/weather/gb/xxxxxxx/xxxxxxx";

bool sendRequest = true; // used to understand if the http request must be sent

/* Create an rtc object */
RTCZero rtc;

/* Change these values to set the current initial time */
const byte seconds = 10;
const byte minutes = 14;
const byte hours = 16;

/* Change these values to set the current initial date */
const byte day = 15;
const byte month = 2;
const byte year = 18;

void setup() {
//Initialize Serial and wait for port to open:
Serial.begin(115200);

connectToAP();    // connect the board to the access point
printWifiStatus();
httpRequest();
listenToClient();

rtc.begin();
rtc.setTime(hours, minutes, seconds);
rtc.setDate(day, month, year);

rtc.setAlarmTime(0, 0, 0);    //in this way the request is sent every minute at 0 seconds
rtc.enableAlarm(rtc.MATCH_SS);

rtc.attachInterrupt(alarmMatch);
}

void loop() {
if (sendRequest) {
sendRequest = false;
httpRequest();
listenToClient();
}
}

void printWifiStatus() {
// print the SSID of the network you're attached to:
Serial.print("SSID: ");
Serial.println(WiFi.SSID());

// print your WiFi shield's IP address:
IPAddress ip = WiFi.localIP();
Serial.print("IP Address: ");
Serial.println(ip);

// print the received signal strength:
long rssi = WiFi.RSSI();
Serial.print("signal strength (RSSI):");
Serial.print(rssi);
Serial.println(" dBm");
}

void alarmMatch() {
sendRequest = true;
}

void connectToAP() {
// check for the presence of the shield:
if (WiFi.status() == WL_NO_SHIELD) {
Serial.println("WiFi shield not present");
// don't continue:
while (true);
}

// attempt to connect to Wifi network:
while ( status != WL_CONNECTED) {
Serial.print("Attempting to connect to SSID: ");
Serial.println(ssid);
// Connect to WPA/WPA2 network. Change this line if using open or WEP network:
status = WiFi.begin(ssid, pass);

// wait 1 second for connection:
delay(1000);
}
}

// this method makes a HTTP connection to the server:
void httpRequest() {
sendRequest = false;

// Print request time
Serial.println();
Serial.print("Request sent @ ");
print2digits(rtc.getHours());
Serial.print(":");
print2digits(rtc.getMinutes());
Serial.print(":");
print2digits(rtc.getSeconds());
Serial.println();
Serial.println();

if (client.connect(server, 443)) {
// Make a HTTP request:
client.println("GET //api/xxxxxxxxxxxxx/conditions/q/xxxxxx.json HTTP/1.1\r\n");  //This is the line IDK how to format
client.println("Host: https://www.wunderground.com/weather/gb/xxxxxx/xxxxxx");
client.println("Connection: close");
client.println();
}
else {
Serial.println("connection failed");
}
}

void listenToClient()
{
unsigned long startTime = millis();
bool received = false;

while ((millis() - startTime < 5000) && !received) { //try to listen for 5 seconds
while (client.available()) {
received = true;
char c = client.read();
Serial.write(c);
}
}
client.stop();
Serial.println();
}

void print2digits(int number) {
if (number < 10) {
Serial.print("0");
}
Serial.print(number);
}