Как использовать переменные в INF-файле драйвера?

Я разрабатываю драйверы фильтров NDIS, используя Visual Studio 2015 and WDK 10, Требуется скомпилировать драйверы, используя разные FilterClass в файле INF (compression а также ms_medium_converter_128). Я не хочу поддерживать два почти одинаковых INF-файла, за исключением разных FilterClass,

Мой вопрос: Есть ли способ использовать переменную или макрос в INF-файл? Таким образом, я могу контролировать фактический скомпилированный INF-контент, используя различные конфигурации в Visual Studio. Эффект похож на:

HKR, Ndi,FilterClass,, %MACRO_OR_VAR_FILTER_CLASS%

Тогда я могу контролировать %MACRO_OR_VAR_FILTER_CLASS% в ВС

Наконец, приложите весь мой INF-файл:

;-------------------------------------------------------------------------
; NPF.INF -- Npcap NDIS 6.x LightWeight Filter Driver
;
; Copyright (c) 2015, Insecure.Com LLC.  All rights reserved.
;------------------------------------------------------------------------
[version]
Signature       = "$Windows NT$"Class           = NetService
ClassGUID       = {4D36E974-E325-11CE-BFC1-08002BE10318}
CatalogFile     = %NPF_DriverName%.cat
Provider        = %Insecure%
DriverVer=05/15/2015,14.48.38.905[Manufacturer]
%Insecure%=Insecure,NTx86,NTia64,NTamd64

[Insecure.NTx86]
%NPF_Desc%=Install, INSECURE_NPF

[Insecure.NTia64]
%NPF_Desc%=Install, INSECURE_NPF

[Insecure.NTamd64]
%NPF_Desc%=Install, INSECURE_NPF

;-------------------------------------------------------------------------
; Installation Section
;-------------------------------------------------------------------------
[Install]
AddReg=Inst_Ndi
Characteristics=0x40000
NetCfgInstanceId="{7daf2ac8-e9f6-4765-a842-f1f5d2501340}"Copyfiles = npf.copyfiles.sys

[SourceDisksNames]
1=%NPF_Desc%,"",,

[SourceDisksFiles]
npf.sys=1

[DestinationDirs]
DefaultDestDir=12
npf.copyfiles.sys=12

[npf.copyfiles.sys]
%NPF_DriverName%.sys,,,2;-------------------------------------------------------------------------
; Ndi installation support
;-------------------------------------------------------------------------
[Inst_Ndi]
HKR, Ndi,Service,,%NPF_DriverName%
HKR, Ndi,CoServices,0x00010000,%NPF_DriverName%
HKR, Ndi,HelpText,,%NPF_HelpText%
HKR, Ndi,FilterClass,, ms_medium_converter_128; For a Monitoring filter, use this:
;     HKR, Ndi,FilterType,0x00010001, 1 ; Monitoring filter
; For a Modifying filter, use this:
;     HKR, Ndi,FilterType,0x00010001, 2 ; Modifying filter
HKR, Ndi,FilterType,0x00010001,2HKR, Ndi\Interfaces,UpperRange, , noupper
HKR, Ndi\Interfaces,LowerRange, , "ndis5,ndis4"

; TODO: Ensure that the list of media types below is correct.  Typically,
; filters include "ethernet".  Filters may also include "ppip" to include
; native WWAN stacks, but you must be prepared to handle the packet framing.
; Possible values are listed on MSDN, but common values include:
;     ethernet, wan, ppip, wlan
HKR, Ndi\Interfaces, FilterMediaTypes,,"ethernet, fddi, wan, ppip, wlan, bluetooth, ndis5, vwifi, flpp4, flpp6, vchannel, nolower"

; For a Mandatory filter, use this:
;     HKR, Ndi,FilterRunType,0x00010001, 1 ; Mandatory filter
; For an Optional filter, use this:
;     HKR, Ndi,FilterRunType,0x00010001, 2 ; Optional filter
HKR, Ndi,FilterRunType,0x00010001, 2 ; Optional filter; By default, Mandatory filters unbind all protocols when they are
; installed/uninstalled, while Optional filters merely pause the stack.  If you
; would like to override this behavior, you can include these options.  These
; options only take effect with 6.30 filters on Windows "8" or later.
; To prevent a full unbind, and merely pause/restart protocols:
;     HKR, Ndi,UnbindOnAttach,0x00010001, 0 ; Do not unbind during FilterAttach
;     HKR, Ndi,UnbindOnDetach,0x00010001, 0 ; Do not unbind during FilterDetach
; To force a full unbind/bind (which includes pause/restart, of course):
;     HKR, Ndi,UnbindOnAttach,0x00010001, 1 ; Unbind during FilterAttach
;     HKR, Ndi,UnbindOnDetach,0x00010001, 1 ; Unbind during FilterDetach
;

;-------------------------------------------------------------------------
; Service installation support
;-------------------------------------------------------------------------
[Install.Services]
AddService=%NPF_DriverName%,,NPF_Service_Inst

[NPF_Service_Inst]
DisplayName     = %NPF_Desc%
ServiceType     = 1 ;SERVICE_KERNEL_DRIVER
StartType       = 3 ;SERVICE_DEMAND_START
ErrorControl    = 1 ;SERVICE_ERROR_NORMAL
ServiceBinary   = %12%\%NPF_DriverName%.sys
LoadOrderGroup  = NDIS
Description     = %NPF_Desc%
AddReg          = Common.Params.reg, NdisImPlatformBindingOptions.reg

[Install.Remove.Services]
DelService=%NPF_DriverName%,0x200 ; SPSVCINST_STOPSERVICE

[Common.Params.reg]

[NdisImPlatformBindingOptions.reg]
; By default, when an LBFO team or Bridge is created, all filters will be
; unbound from the underlying members and bound to the TNic(s). This keyword
; allows a component to opt out of the default behavior
; To prevent binding this filter to the TNic(s):
;   HKR, Parameters, NdisImPlatformBindingOptions,0x00010001,1 ; Do not bind to TNic
; To prevent unbinding this filter from underlying members:
;   HKR, Parameters, NdisImPlatformBindingOptions,0x00010001,2 ; Do not unbind from Members
; To prevent both binding to TNic and unbinding from members:
;   HKR, Parameters, NdisImPlatformBindingOptions,0x00010001,3 ; Do not bind to TNic or unbind from Members
HKR, Parameters, NdisImPlatformBindingOptions,0x00010001,0 ; Subscribe to default behavior

[Strings]
NPF_DriverName = "npf"Insecure = "Nmap Project"NPF_Desc = "Npcap Packet Driver (NPCAP)"NPF_HelpText = "A NDIS 6 filter driver & WFP callout driver to support packet capturing and sending under Windows 7, 8 & 10"